Classification of high speed steel end mills

2 8月 2022 | 没有评论 | posted by admin | in Article

According to the application, it can be divided into end mills and keyway milling cutters. End mills are divided into coarse teeth and fine teeth. Generally, a straight shank end mill with three cutting edges is called a coarse tooth milling cutter, and a straight shank end mill with more than three cutting edges (such as four or five) is called a straight shank end mill. For fine-tooth milling cutters. Taper shank milling cutters are also classified in this way.

Ball nose milling cutter features

30 7月 2022 | 没有评论 | posted by admin | in Article

Ball End Mill Features: Material: High Speed Steel/Special Hardened High Speed Steel Ball End Mill

Suitable for milling materials: die steel, cast iron, carbon steel, alloy steel, tool steel, general iron; Uses: widely used in various curved surfaces, arc groove processing. High temperature resistance: The maximum temperature to maintain cutting performance is 450-550/500-600 degrees Celsius.

T-slot milling cutter

28 7月 2022 | 没有评论 | posted by admin | in Article

T-slot milling cutters can be divided into tapered shank T-slot milling cutters and straight shank T-slot milling cutters.

Uses: Used for processing T-slots on various mechanical table tops or other structures.

Features and accuracy: It is a special tool for processing T-slots. After straight grooves are milled, T-slots with the required accuracy can be milled at one time. The end edge of the milling cutter has a suitable cutting angle. , The cutting is smooth and the cutting force is small.

Specification description: T-slot milling cutters generally describe its model from the following aspects: disc and tooth diameter (outer diameter), disc thickness (blade length), number of teeth (number of blades), shank diameter ( shank diameter), full length.