Keyway milling cutter difference

10 5月 2022 | 没有评论 | posted by admin | in Article

1. The keyway milling cutter cannot process the plane, while the end mill can process the plane.

2. The keyway milling cutter is mainly used for processing keyway and groove, and the keyway milling cutter is very useful for milling keyway. For example, a 6MM end mill and a keyway milling cutter 6MM are more likely to be slotted than a 6MM end mill, and the end mill is easy to break, while the keyway milling cutter can pass through it in one go.

3. The cutting amount of the keyway milling cutter is larger than that of the end mill.

The use of end mills—–face milling

9 5月 2022 | 没有评论 | posted by admin | in Article

End mills can be used for face milling. However, because its main declination angle is 90°, the force on the tool is mainly radial force in addition to the main cutting force, which is easy to cause deflection and deformation of the tool bar, and also easy to cause vibration, which affects the processing efficiency. Therefore, in addition to similar to thin-bottomed workpieces Except for special reasons such as the need for small axial forces or the occasional reduction in tool inventory for face milling, end mills are not recommended for machining flat surfaces without steps.

Tungsten steel milling cutter

7 5月 2022 | 没有评论 | posted by admin | in Article

It is a tool made of tungsten steel (hard alloy, also known as tungsten-titanium alloy). Generally, it is mainly used in CNC machining centers and CNC engraving machines.

It can also be installed on ordinary milling machines to process some relatively hard and uncomplicated heat-treated materials. Tungsten steel milling cutters are widely used and high-speed machining is used. The hardness of tungsten steel milling cutter is Vickers 10K, second only to diamond. Because of this, the tungsten steel milling cutter is not easy to be worn, and it is brittle and hard and not afraid of annealing.