Single-edged Cone Knife

17 9月 2021 | 没有评论 | posted by admin | in Article

Small angles and small blades should be used when engraving fine text patterns, large angles and large blades should be used when engraving large text patterns, the angle and blade should be maximized when selecting the knife path design to improve the efficiency of engraving, and the angle of the harder material should be large. , The blade should be big (knife acrylic), 45 degrees, 60 degrees, 90 degrees, 120 degrees can be used for V-cutting of plates.

T knife

15 9月 2021 | 没有评论 | posted by admin | in Article

T-shaped cutter is a tool assembled on a milling machine for milling T-shaped grooves and side grooves of workpieces. T-shaped cutters are also called T-shaped milling cutters, semicircular milling cutters, and keyway milling cutters, which can perfectly process T-shaped grooves and side grooves. Normally maintain cutting performance at high temperatures.

Tungsten steel blade

14 9月 2021 | 没有评论 | posted by admin | in Article

Tungsten steel blades are made of tungsten steel. Tungsten steel is an alloy material made of hard compounds of refractory metals and bonding metals through powder metallurgy.

Tungsten steel has a series of excellent properties such as high hardness, wear resistance, good strength and toughness, heat resistance and corrosion resistance, especially its high hardness and wear resistance, which remain basically unchanged even at a temperature of 500°C. It still has a high hardness at 1000°C.