Flat knife

25 10月 2022 | 没有评论 | posted by admin | in Article

The cutting edge is flat and straight. It is mainly used to cut and smooth the concave and convex of the wood surface to make it smooth and traceless. Large models can also be used to chisel large ones. They have a sense of blockiness. They can be used properly, such as the brushwork effect of painting, which is vigorous, powerful, vivid and natural. The sharp angle of the flat knife can mark lines, and when the two knives intersect, the foot of the knife or the pattern can be removed.

Single edge taper cutter

24 10月 2022 | 没有评论 | posted by admin | in Article

Small angle and small blade shall be selected when carving fine text patterns, and large angle and large blade shall be selected when carving large text patterns. The maximum angle and blade shall be selected when designing carving knife path to improve carving efficiency. The angle of carving material shall be larger than that of hard material, and the blade shall be larger (knife acrylic), 45 °, 60 °, 90 °, 120 ° can be used for V-shaped cutting of plates.

Difference between two edge milling cutter and three edge milling cutter

22 10月 2022 | 没有评论 | posted by admin | in Article

Different precision requirements:

1. The size of keyway milled by the two edge milling cutter can reach high accuracy, and the end face of the keyway milling cutter does not have a central hole, so it can directly feed down, instead of the common three edge milling cutter, which cannot directly feed down because of the central central hole.

2. The end mill with three edge milling cutter can not achieve the precision of keyway milling cutter. When the two milling cutters are milling, there is no difference in the three elements of milling.