Bottom Cleaning Knife Setup and Use
Bottom Cleaning Knife operation requires a rigid setup, correct overlap, and controlled cutting depth. This wide router cutter levels pocket bottoms, flattens wood surfaces, removes spoilboard material, and creates clean recesses.
Table of Contents
Mount the cutter with minimum safe projection and verify collet condition and spindle runout. Secure the workpiece, set the zero reference carefully, and begin with a shallow test cut. Use sufficient overlap between passes to avoid ridges, but do not overload the tool with excessive depth or feed.
Select spindle speed and feed to produce clean chips without burning. Use dust extraction, keep hands clear, and stop the machine before inspection. Check edge wear and replace damaged inserts promptly. A reliable cutting tool manufacturer can recommend diameter and parameters; review router safety and operation basics before machining.
发表回复
要发表评论，您必须先登录。