Single-edged Column Knife (Cemented Carbide)

Main performance: two-dimensional cutting
Applicable material: two-color board, plastic board, also can be used: acrylic thickness under 3MM
Note: For cutting two-color boards, if there is no special requirement, the finished product can be cut with a sharp knife, but it is easy to dull after cutting with a sharp knife, and then engraving will cause burrs. Single-edged column knife, the design principle is the same as that of a sharp knife, but it cuts vertically without slope, which is especially suitable for the design of inlay craftsmanship.

This article was written by: admin

发表评论

邮箱地址不会被公开。 必填项已用*标注

*